Want to bring your hardwood floors back to your life? Well, that’s possible!
With sanding and refinishing, you can revitalize hardwood floors. Before you proceed towards the refinishing process, proper preparation is needed.
Wondering how you’re going to prepare for refinishing process. Let us tell you how!
Decide When You Want The Project To Be Held
There are upsides and downsides to any time of the year you want the project to be done. During summers, windows can be opened to air things out.
Winters are also ideal. Most hardwood contractors and firms extend great deals and discounts on hardwood services during winters. So, there is no particular best time.
Pick a time when it’s feasible for you. Make sure you ask hardwood floor refinishing professionals about how time-consuming the entire process is, to understand how long your routine will get disrupted.
Refinishing An Existing Hardwood Floors
The process of sanding and finishing an already existing floor begins as you might assume with sanding the platform till the surface is to raw wood, clear of any prior stain or glaze. Approximately 500-600 meters can be covered in a day.
The next process comprises coating with sealer and a few coats of polyurethane. The last leg of the project comprises a 12-hour dry time. Consequently, a 3-day refinishing implies that you’ll be back more or less on the 4th day.
Prefinished floors can be installed in 2 days with zero dry time. It has a pretty faster installation time.
New Floor Installation
Installing new hardwood floors has a lot to do with. Boards require to be cut and set properly. The layout of the room can influence the volume of time the project demands. Little corners indicate more cutting and work.
The expanse of the boards further creates a contrast. Skinny boards intend more boards have to be cut and laid than in the case of wider planks. In common, an investment can take at least 24 hours per every 200 meters of flooring. Later, you have the dry condition for the sealant.
Things To Do Before The Project starts
When planning a project, consult hardwood floor refinishing Sherman oaks and ask them about the preparations to be done beforehand. Some of the common preparations are:
All furniture must be transferred from the area where refinishing and installation will be executed.
Remove the carpeting, including tack pieces and staples. The subfloor should have a soft and smooth exterior.
Skim any linoleum or vinyl floor coating.
Tips To Control Dust In Your Homes
You can use vacuum and dust containment bags but they don’t prove to be 100% effective. Several things can be done to decrease the volume of dust that will enter your home throughout the refinishing project.
- Try utilizing plastics. Hang them in the doorway.
- Clear countertops thoroughly
- Make sure you keep all your food sealed and away
- Use painters tape to seal cupboard seams and drawers
Remove Doors, Baseboards, And Trims
These things can be removed before and after. One can reuse the old ones or replace them with new trims and baseboards.
Where Will The Experts Cut The Boards?
Hardwood floor refinishing experts are equipped with vacuums so cutting will also be done in the space where installation is being carried out./ Also, it’s wise to be closed to the site as it saves time and makes the process easier.
What About The Pets?
This is most people’s question. What do they do about their pets while the project is in its full flow? Is it okay if they leave their pets free during the project or not?
Well, it totally depends on the kind of finish. If the water-based finish is being used then it’s safe for pets to roam around but if the oil-based finish is applied then it’s a big no.
Another big factor that one should pay heed to is the immense Noise. Pets cannot prevent the noise by wearing earbuds and will be bothered by the loud sound of guns and machines.
Also, it is possible for your little pooch to slip out of the doors when wood floor workers are getting in or out. The best would be to have your pets somewhere else until and unless the work is completed.Finally, Maple is a better option when it comes to your home flooring. It is durable and costs less than other wood flooring types.
Related Article: Things You Need to Know About Hardwood Flooring Refinishing