Things You Need to Know About Hardwood Flooring Refinishing
After a certain period, the hardwood floor starts to show its age. The most common symptoms of understanding that your hardwood floor has started showing its age is when you notice scratchiness, dullness, and discoloration.
The typical three-fourth-inch thick hardwood floor can be sanded about 8 times in its lifetime. Therefore, if your house isn’t incredibly old or the previous refinished did a disaster, there are still chances that you can bring your wood floor back to life.
To get the satisfaction of perfect refinishing, you need to know certain things that you were not aware of the entire refinishing process.
Types Of Finish
Before refinishing you need to know what are the different types of finishes you can go with.
This type of finish is basically water and oil-based. Also, It has varying degrees of luster and has a plastic-looking finish.
This type of finish mostly extends a matte-glossy look. It also comes in different lusters, is more durable, and can be spot repaired.
It has a natural-looking finish. It darkens over time, easier to repair, and provides good protection.
Hardwood Floor Refinishing may appear to be a more economical choice but refinishing hardwood floors is actually a difficult process and is also labor-intensive.
It is seen that even the slightest mistake while refinishing can do blunders and you might have to start the process all over again. To prevent this you should always take the help of professionals or experts.
Problems like buffing too hard, thinning the floor, or buffing unevenly are common m mistakes that people do. The time and skill required for this can only be rendered by professionals.
Most hardwood floor refinishing san Fernando valley and in other areas are charged by the square foot, but prices vary depending on locations, your home’s accessibility, the job you want to be done, and the size of the space. This includes the color of the stain.
Sanding Is Not Required Always
In the case where your wood is normally scratched and the wear hasn’t reached the actual wood then there’s no need for sanding. One can just go for scuff sanding with a buffer and apply a coat or two to finish.
If you want to prevent the moisture from being absorbed into the wood, seal the floor right away after the sanding is done. There should be a 48 hours timeline of drying time and then you can put your things back into the room.
Buff And Clean Between Coats
You can’t constantly keep applying paints on Hardwood floors. They are different! Here when the floor dries, you need to gently buff the floor to eliminate all the impurities. Ensure that you are removing all the dust and impurities with an oil-infused cheesecloth and restricts them out of the finish.
A Sheepskin Applicator Should Be Used
Use a sheepskin applicator for getting the absolute finish. Using this makes the floor come all smooth and even. Using other alternatives like brushes and rollers will not help here as they create streak and pools.
Related Article: How Select Between Refinishing and Replacing the Wood Floor?