Wood flooring is a preferable choice for a majority of people out there. And that is because of a variety of reasons. It provides good aesthetics, is a durable and long-lasting flooring option, and is easy to maintain.
But, as good as it sounds, the reality hits differently when you look at the swarm of disadvantages that you have to face.
For instance, while cleaning wooden floors, you need to be extra careful with the mopping part. Because excess water coagulation might result in moisture absorption which will eventually lead to cupping or swelling of the floorboards.
High-traffic areas require cleaning of the floors quite frequently. So, the use of floor cleaners that are suited for wooden materials is essential. One such cleaning solution that has been in the market since the 20th century is Pine Sol.
In this blog, we will be learning about the cleaning agent Pine Sol, and will also be discussing whether it is fit for cleaning wood flooring or not.
Does Pine Sol damage hardwood floors?
Pine-Sol, a product of the Clorex Company, has been the favorite cleaning agent among American households. And according to the manufacturers, the cleaning agent is safe for wiping down not only wood surfaces, but also kitchen sinks and floors as well.
And when it comes to wooden flooring, Pine-Sol can be used ideally for hardwood flooring as well as engineered hardwood flooring, as long as the wooden floors are finished properly.
Hence, it can be easily concluded that Pine Sol would not cause any kind of harm to hardwood floors as long as the finishing work is done optimally.
How do you use Pine Sol on wood?
Now, let us take a step-wise approach to learn the perfect usage of Pine Sol on wooden flooring.
For instance, you are about to clean your newly installed wood flooring. And you have bought Pine Sol cleaning agent.
Following are the steps that you need to follow to optimally clean the hardwood floors-
The very first thing to do is to optimally get the dust, dirt, and debris off the floor by sweeping or using a vacuum cleaner. You need to ensure that no loose dirt is lingering on the floor while you will be mopping it in the next step.
Take about ¼ cup of Pine Sol. Add it to about a gallon of water, and mix it thoroughly. After that make use of the solution to mop your wooden floors. Make sure that the solution does not coagulate on the floors directly else it might cause the floorboards to warp and even streak.
If you see that the flooring is full of stains and marks, use Pine Sol a little wisely. In such cases, take some of the solutions, put them on a toothbrush or sponge (avoid steel wool as it is a rough thing in itself), and neatly spread it only over the stained area. Rub it and get the stain removed in no time.
After this step, what’s left for you is to rinse the solution with water. Remember that you cannot leave a concentrated solution like this on your wood floors as it corrodes the surface.
How can I make my wood floors look new again?
With time, the surface luster of wood flooring slowly tends to wear away. This results in dullness in the surface of the flooring, and also makes it look much older than it is.
The only way to make the floors look like new again is either to opt for a dustless hardwood floor refinishing or a floor sanding and polishing service. Because only sanding the surface down and coating it with a finish will bring back the new-like luster of the floor surface.
What will ruin hardwood floors?
Not properly maintaining wood floors, letting dust and debris collect over the surface for a long period, and not opting for a hardwood floor repair and refinishing service after say 5- 7 years will ruin your hardwood flooring.
Tip: For more information on the optimal maintenance of hardwood floors, visit or consult any hardwood flooring company in Los Angeles to get the best advice.